What does 'switch cabinet according to TEİAŞ standard' mean?

A TEİAŞ standard switch cabinet is designed so that the structure, components, wiring, labeling and tests meet the specifications of the Turkish transmission system operator - with a focus on operational safety, documentation capability and standard-compliant power distribution.

For which voltage levels is a TEİAŞ-compliant switch cabinet used?

TEİAŞ-type panels are used (depending on the project) in environments that are in practice connected to 34.5 kV / 154 kV / 380 kV networks (protection, control and measurement functions including transfer to automation systems).

Which functions do TEİAŞ control cabinets often have to cover (protection/control/measurement)?

Typical functions are protection, switching/control and measurement in mains operation - including signal/measured value provision for SCADA automation (telemetry, statuses, alarms, measured values).

What documents should a supplier provide for TEİAŞ-compliant enclosures?

Experience has shown that these are relevant for acceptance and subsequent maintenance: Circuit diagrams, terminal/wiring lists, device and type plates, I/O lists (if automation connection), test logs (FAT) and a clear document index for revisions.

How is traceability ensured in the wiring?

A common approach is to deliver fully equipped, with numbered cables and devices installed and labeled according to the project/electrical plan - so that installation, troubleshooting and service remain reproducible.

What degree of protection (IP) is appropriate for TEİAŞ control cabinets - and what does it depend on?

The appropriate degree of protection depends on the installation location (indoor/outdoor), dust/moisture exposure, cleaning regimes and maintenance access. Examples of IP concepts are listed on the page (e.g. IP 2X or IP 44 depending on the version).

Which requirements are particularly critical for SCADA/telecontrol connections?

Signal quality, consistent terminal assignment, defined voltage levels/interfaces (e.g. digital status signals, analog inputs), clean potential separation (where necessary) and a documented address/tag structure for the control technology are critical - so that commissioning times do not explode.

Which tests (FAT/SAT) are common for TEİAŞ Projects?

A structured factory test (FAT) with visual/wiring test, functional tests of the control logic, measuring/protective chain checks and documented results is standard; followed by SAT/commissioning tests on site depending on the project. TEİAŞ has its own technical specifications for certain equipment.

TEİAŞ vs. TEDAŞ: Why is differentiation important in tenders?

TEİAŞ stands for the transmission grid context, TEDAŞ is more present in the distribution grid environment; requirements, type tests and documentation logics may differ. Accordingly, the specification sheet should clearly state which specification/'MYD' is required.

What information should a buyer provide for a reliable offer?

In order for the offer, layout and delivery date to be reliable, the following should be available as a minimum: Network/system topology, functional description (protection/control/measurement), desired interfaces (control technology), installation conditions, acceptance scenario (FAT/SAT), scope of documentation and, if applicable, specifications for labeling/language version.

info@atceenerji.com

Switch cabinet according to TEİAŞ standard

Switchgear manufacturer

Rely on ATCE Energy when you need a control panel that meets the highest quality standards. We understand your needs and offer solutions that will exceed your expectations. Panelboard manufacturing is our specialty - let's work together to find the best solution for your business.

20 years of experience in the field of Switch cabinet according to TEİAŞ standard

Affordable alternative from Turkey.

Fast delivery

All certifications required in Europe available

Make a non-binding inquiry now

Switch panel manufacturer from Turkey

If you are looking for a reliable manufacturer of control panels, then ATCE Energy is the right place for you. With over 10 years of experience in switch panel production, we know exactly what is important. Switch panels are the heart of every electrical distribution system. That is why we attach great importance to quality and precision in the manufacture of our products.

ATCE Energy offers a wide range of switch panels for electrical distribution boards. Whether you need switchboards for solar energy or switchboards for complex systems, we have the right solution for you. Our switch panels are specially designed to work reliably even under demanding conditions.

As an experienced switch panel manufacturer, we know that every system has different requirements. That's why we adapt our control panels to your individual needs. Whether it is a simple or complex system, we offer you the best solution. We make sure that our control panels are easy to operate and maintain.

Our expertise in switch panel production ensures that you can rely on our products. At ATCE Energy, we know that the quality of your switchboards is crucial to the safety and efficiency of your electrical distribution. That's why we rely on modern technologies and strict quality controls.

When it comes to switch panels for solar energy, we are your reliable partner. Our switch panels are optimally adapted to the special requirements of solar systems and guarantee efficient and safe distribution of the energy generated.
ATCE Energy is your experienced manufacturer of control panels. You can rely on our experience and our commitment to quality. Whether you are looking for switchboards for simple electrical distribution boards or for complex systems, we are here to provide you with the best products. Contact us today to find out more about our customized solutions.

Do you have questions about TEIAS-type panels?

Make a request

Control panels in our range:

External switchboards of the EPI series

The EPI series from Atce includes external control panels that are supplied fully equipped. All cables are numbered, the devices are installed and labeled according to the electrical project. Atce is an experienced manufacturer of customized control panels that are tailored to the customer's specific requirements.

Each panel in the EPI series is manufactured to the highest quality standards and provides a durable and reliable solution for industrial applications. The products in this series are robust and suitable for outdoor use. Thanks to their adaptability, they can be optimally integrated into different electrical systems.

EPI Series - ATCE Energy - Panel manufacturer

Technical data of the EPI series

EPI SERIES
DEFINITION	MECHANICAL SYSTEM	SHEET METAL OPTION	BLECHDICKE	COLOR OPTION	LOCK SYSTEM	IP CODE
EQUIPPED INTERNAL NAMEPLATES	MODULAR	GALVANIZED	1.5 mm	STANDARD RAL 7035	3 POINT	IP 2X
	SEMI-MODULE	DKP	2 mm	OTHER OPTIONS	4 POINT	IP 44
TECHNICAL DETAILS
Scaffolding	Gate	Base	Roof	Back covers	Mounting plate	Cover plate
1.5 mm	1.5 mm	2 mm	2 mm	1.5 mm	1-2 mm between the values	1.2 mm
2 mm	2 mm					1.5 mm
TYPES OF PLATES DEPENDING ON THE INTENDED USE
TEDAŞ-TYPENBOARD-TYPES	TYPES OF COMPENSATION BOARDS	TYPES OF PANELS FOR RENEWABLE ENERGIES	CONSTRUCTION SITE PANEL TYPES
MAIN DISTRIBUTION BOARDS (MDB)	HARMONIC-FILTERED COMPENSATION CARDS	PLC BOARDS	KIOSK
UPS DISTRIBUTION BOARDS (UDB)	TRISTOR-SWITCHED COMPENSATION PLATES	DDC BOARDS	PULT
		SCADA-BOARDS	PIANO

Main distribution cabinets - Internal type

The EPI series main distribution cabinets from Atce are specially designed for indoor use. They serve as central switchboards in power plants and enable the distribution of electrical energy in factories, workshops and workplaces.

These cabinets house the distribution line switches that ensure the safe and efficient operation of electrical systems. Atce offers customized solutions that are precisely tailored to the requirements of each project.

Each distribution cabinet is fully assembled and numbered for easy installation and maintenance. Rely on the expertise of Atce, your switchboard manufacturer, to create reliable and customized distribution systems for your energy networks.

Main distribution boards - Internal type - ATCE Energy - Panel manufacturer

Internal distribution cabinets of type UPS

Our EPI series UPS internal distribution cabinets are specially designed for indoor use. They ensure the supply of critical loads through uninterruptible power supplies (UPS) in the event of a power failure. These distribution cabinets are designed to offer maximum reliability and safety.

Each cabinet is individually manufactured and customized according to the customer's requirements. This makes them ideal for applications where flexibility and customized solutions are required. As a manufacturer of switchboards, we attach great importance to quality and precision.

UPS type internal distribution cabinets - ATCE Energy - Panel manufacturer

Compensation plates with internal harmonic filter

The compensation panels with internal harmonic filter of the EPI series are used where the harmonic load level and the load change rate are low.

These panels help to reduce system costs by increasing the active power capacity and reducing the reactive power required by transformers. The use of harmonic filters prevents problems caused by harmonic disturbances.

Voltage losses that occur in systems without filters reduce efficiency and jeopardize the safety of the system. The compensation panels are specially manufactured according to customer requirements and offer customized solutions. As a manufacturer of control panels, we guarantee high quality and reliability in implementation.

Compensation panels with internal harmonic filter - ATCE Energy - Panel manufacturer

Internal switching thyristor compensation plates

The internal switching thyristor compensation panels of the EPI series from Atce Enerji offer a tailor-made solution for efficient grid stabilization with highly fluctuating loads. These switchboards are used in particular where the harmonic load in the grid is above the permissible limits and rapid load changes occur. Thanks to precise control via thyristors, immediate and reliable compensation is guaranteed, minimizing voltage distortions.

As a manufacturer of switchboards, Atce Enerji offers the possibility to customize the panels according to the customer's requirements. Each unit is manufactured to the highest quality standards, ensuring a long service life and maximum efficiency in operation. Rely on Atce Enerji's proven technology to ensure power quality in demanding environments.

DDC automation cards - internal type

The DDC automation boards - internal type from the EPI series from Atce Enerji offer customized solutions for the control and monitoring of industrial processes. These switchboards are particularly efficient in environments where rapid load changes occur and mains pollution from harmonics is above the limit values.

Thanks to the use of thyristor-switched compensation plates, they ensure a reliable and stable power supply. As a manufacturer of switchboards, Atce Enerji develops these products according to customer-specific requirements and offers maximum flexibility. The automation boards are also designed for internal use and ensure precise control of electrical systems.

This makes them ideal for industrial applications where efficiency and stability are crucial.

DDC automation boards - Internal type - ATCE Energy - Panel manufacturer

PLC automation boards - Internal type

The "PLC Automation Boards - Internal Type" from the EPI series from Atce Enerji are specially developed boards for the automation of process sequences in production plants and factories. They enable the automatic and efficient control of machines and processes, thereby optimizing workflows.

Each circuit board is individually manufactured according to the customer's specific requirements and therefore offers maximum flexibility. As a manufacturer of control panels, we attach great importance to precision and reliability in the implementation of customer requirements. The boards are designed for internal use and offer maximum efficiency and performance. Thanks to our many years of experience, we guarantee robust solutions that meet the requirements of modern industrial systems.

Internal Scada automation cards

Atce Enerji's EPI series PLC automation boards - internal type offer a reliable solution for the automation of control processes. As a manufacturer of control panels, we develop customized boards that can be seamlessly integrated into existing SCADA systems.

SCADA systems are centralized systems that enable comprehensive monitoring and control of all sites. Simple control and data acquisition allow many systems to be monitored efficiently and control sequences to be executed effortlessly.

Our PLC automation boards are characterized by high flexibility and precision, making them ideal for complex industrial applications. Each product is individually manufactured to our customers' specific requirements to ensure maximum efficiency and performance.